SENSITIVITY CALIBRATION OF ACCELERATION SENSOR BASED
ON SHAKING TABLE
Wuhan Institute of Seismologic Instrument, Institute of Seismology, CEA, Wuhan 430071
Abstract The sensitivity and transverse sensitivity of AC23 current accelerometer are calibrated by the lowfrequency vibration device GSK166 based on the comparison method. The experimental results show that the calibration method which the data are analyzed by MATLAB is easier and more accurate.
Key words ：
shaking table
acceleration sensor
sensitivity
transverse sensitivity
calibration
Received: 30 January 2012
Published: 25 September 2013
Cite this article:
Chen Chuanjun,Chen Zhigao. SENSITIVITY CALIBRATION OF ACCELERATION SENSOR BASED
ON SHAKING TABLE[J]. jgg, 2013, 33(Supp.1): 168-171.
Chen Chuanjun,Chen Zhigao. SENSITIVITY CALIBRATION OF ACCELERATION SENSOR BASED
ON SHAKING TABLE[J]. jgg, 2013, 33(Supp.1): 168-171.
URL:
http://www.jgg09.com/EN/ OR http://www.jgg09.com/EN/Y2013/V33/ISupp.1/168
[1]
.
[2]
.
[3]
.
[4]
HU Zhifei，ZHANG Kanghua，TIAN Jiayong. A Review of In-Situ Calibration Method for Borehole Strainmeter Observation
[5]
Lü Yongqing, XIANG Ya, ZHOU Yunyao, QI Junwei, WU Huan, PENG Jing. Study on Method of Eliminating Seismometer Step Calibration Signal
[6]
LANG Junjian, LIANG Xinghui, TU Haibo, LIU Leijun, HU Ming, HE Jiangang, LIU Lintao. Calibration of Scale Value for CHZ-Ⅱ Air-Sea Gravimeter
[7]
.
[8]
.
[9]
.
[10]
WANG Yingjian,QIU Xuefeng,ZHANG Songtang,GAO Xinbing,LI Jianguo. Calibration and Analysis of the Gaoyakou Short Gravity Calibration Baseline
[11]
. Method to Improve the Measurement Accuracy of Laser Tracker Based on the Length Standard Device
[12]
WU Liheng, XIONG Yuzhen, LI Tao, CHEN Zheng. In-Situ Linear Calibration Technique of the RZB-Type Borehole Strain Meter:Including a Laboratory Experiment
[13]
ZHANG Chengqiang. Test and Calibration of the LCR-G Gravimeter
[14]
.
[15]
.
