RESEARCH ON AUTOMATIC MONITORING TECHNIQUE OF PIPE REPLACED BY BOX CULVERT JACKING PROCESS
Pan Guorong 1, 3) ; Song Yunpu 2) ;Li Huaifeng 1) ; and Zhang Peng 1)
1)Department of Surveying and Geo-informatics, Tongji University, Shanghai 200092;2)Department of Mechanical Engineering, Tongji University, Shanghai 200092;3)Key Laboratory of Modern Engineering Surveying, SBSM, Shanghai 200092
Abstract Automatic real-time guidance measurement is the key to modern construction measurement. Nowadays,in China the new underground 3D traffic engineering method of pipe replaced by box culvert jacking is used, but the manual measurement can not meet the requirement of realtime monitoring.So a set of Total Stationbased intelligent automatic guidance system has been developed thus could achieve the measurement automatically and improve work efficiency greatly. The principle and key technology of this intelligent guidance system is introduced.In the same time,combined with successful application of culvert jacking highway in the existing railway project in Shanghai Jinshan, this system proved practical and excellent with higher reliability and accuracy.
Pan Guorong,Song Yunpu ,Li Huaifeng et al. RESEARCH ON AUTOMATIC MONITORING TECHNIQUE OF PIPE REPLACED BY BOX CULVERT JACKING PROCESS[J]. , 2012, 32(2): 78-81.
Pan Guorong,Song Yunpu ,Li Huaifeng et al. RESEARCH ON AUTOMATIC MONITORING TECHNIQUE OF PIPE REPLACED BY BOX CULVERT JACKING PROCESS[J]. jgg, 2012, 32(2): 78-81.
